
TileVent®
Proven Hip & Ridge Vent for Tile-Shaped Roofs. To be used in conjunction with Universal Water Dam.
Choose TileVent® as Your Ridge vent
TileVent ® from Ventco Inc. is designed as a ridge vent for a tile-shaped roof. When used with the Universal Water Dam, TileVent ® exceeded Miami-Dade rain and wind performance tests. Even if the ridge tiles are broken, the 8mm protective cap will prevent leaks. TileVent ® is available as a 20’ x 10¾” x 1½” roll.
Benefits and Features of TileVent® Ridge vent
TileVent ® Ridge Vent is the only continuous ridge vent that provides 22 square inches net free area per lineal foot
Fits any pitch 3:12 to 20:12
Exceeds ICC wind driven rain performance tests
Unique design exceeds Miami-Dade wind driven rain performance tests when installed with the Universal Water Dam
8 mil polypropylene protective cap seal prevents leaks if ridge tiles are broken and is clearly marked for alignment and fastening with nails or screws
Specially formulated pressure sensitive adhesive will adhere ridge vent to the roof tilesfor ease of installation
A 6” flap provides self-capping to prevent water intrusion at the gable ends.
Class A Fire Rating, so it will not burn
UV stable
Made in USA
40-Year limited lifetime warranty
Benefits and Features of Universal Water Dam
This is a perfect choice if you live in an area that has severe weather conditions. Using the TileVent ® with the Universal Water Dam will prevent rain from getting into your home or building when the wind makes the rain go sideways. When properly installed with soffit vents, meets the ventilation requirements of HUD, ICC and Miami-Dade model building codes.
When TileVent ® and the Universal Water Dam are used together they allow for 22 square inches of net free area per lineal foot of ridge or hip.
In severe weather regions where high wind and driven rain are prevalent, the Universal Water Dam must be used on all hip and ridge applications. With hip applications, you must not cut the hip open at least two feet top and bottom of hip. Universal Water Dam must be used with TileVent ® Ridge Vent.
Exceeds ICC and Miami Dade wind driven rain performance testing.
Wind Test for TileVents®
The above 110 MHP wind-driven rain test has been established as the industry standard for ridge vent performance. These tests were conducted at Intertec, Reading, PA, a premier testing facility for building products in the U.S. ProfileVent products passed all phases of this difficult test.
Get TileVent® Hip & Ridge Vent for Tile-Shaped Roofs
Ventco Inc. serves areas nationwide and most of Canada. Call customer service at 833-300-9515.
Testimonials
